![background image](http://html1.mh-extra.com/html/omron/cpm2c-s100c/cpm2c-s100c_operation-manual_742520088.webp)
66
Wiring and Connections
Section 3-4
1,2,3...
1.
Align the connector and insert it into the Unit.
2.
Use a Phillips screwdriver to tighten the connector’s fastening screws.
Assembling Soldered
Connectors
Use the following procedure when wiring and assembling a soldered connec-
tor (OMRON C500-CE241).
1,2,3...
1.
Slide heat-shrink tubing over the power supply wires and solder the wires
to the appropriate pins on the socket.
2.
After soldering all of the pins, slide the heat-shrink tubing over the soldered
power supply pins and shrink the tubing by heating it with a heat gun.
Phillips screwdriver
Heat-shrink tubing
Connector
Power supply wires
Heat-shrink tubing
Summary of Contents for CPM2C-S100C
