Omron CPM2C-S100C, Operation Manual, Page: 196 / 269

174
Programming Console Operations Section 8-2
Note The operands of MOV(21) can be word addresses, so the CONT/#
Key must be pressed to input a constant.
• Writing a Word Address
11. Input the second operand.
Press the WRITE Key to write the instruction to Program Memory. The next
program address will be displayed.
Note When the default display value is “000”, a word address can be input
immediately without pressing the Shift and CH/# Keys.
12. Input the next instruction.
Press the WRITE Key to write the instruction to Program Memory.
• Writing an Unsigned Decimal Number
13. The first operand is input as an unsigned integer.
Input the value of the operand from 0 to 65535.
Note If an erroneous input is made, press the CLR Key to restore the sta-
tus prior to the input. Then enter the correct input.
14. Restore the hexadecimal display.
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
15. The second operand is input as a signed integer.
*
EM
LR
B
1
A
0
00202 MOV DATA B
LR 10
WRITE
00203READ
NOP (000)
FUN
F
5
A
0
!
),* #
WRITE
! ),* ,)6) )
CONT
#
SHIFT TR NOT
! ),* ,)6) )
C
2
F
5 6
! ),* ,)6) )
#$
SHIFT TR
! ),* ,)6) )
WRITE
! ),* ,)6) *
CONT
#
SHIFT TR
00203 ADB DATA B
#+00000