![background image](http://html1.mh-extra.com/html/omron/cpm2c-s100c/cpm2c-s100c_operation-manual_742520115.webp)
93
SR Area
Section 4-4
SR 252
00
High-speed Counter Reset Bit
Read/
write
01 to 03
Not used.
04
Pulse Output 0 PV Reset Bit
Turn ON to clear the PV of pulse output 0.
Read/
write
05
Pulse Output 1 PV Reset Bit
Turn ON to clear the PV of pulse output 1.
06, 07
Not used.
08
Peripheral Port Reset Bit
Turn ON to reset the peripheral port. Automatically turns OFF when reset is complete.
Read/
write
09
RS-232C Port Reset Bit
Turn ON to reset the RS-232C port. Automatically turns OFF when reset is complete.
10
PC Setup Reset Bit
Turn ON to initialize PC Setup (DM 6600 through DM 6655). Automatically turns OFF
again when reset is complete. Only effective if the PC is in PROGRAM mode.
11
Forced Status Hold Bit
(See note.)
OFF: The forced status of bits that are forced set/reset is cleared when switching
between PROGRAM mode and MONITOR mode.
ON:
The status of bits that are forced set/reset are maintained when switching
between PROGRAM mode and MONITOR mode.
The PC Setup can be set to maintain the status of this bit when the PC is turned off.
12
I/O Hold Bit
(See note.)
OFF: IR and LR bits are reset when starting or stopping operation.
ON:
IR and LR bit status is maintained when starting or stopping operation.
The PC Setup can be set to maintain the status of this bit when the PC is turned off.
13
Not used.
14
Error Log Reset Bit
Turn ON to clear error log. Automatically turns OFF again when operation is complete.
Read/
write
15
Not used.
Word(s)
Bit(s)
Function
Read/
write
Summary of Contents for CPM2C-S100C
