![background image](http://html1.mh-extra.com/html/omron/cpm2c-s100c/cpm2c-s100c_operation-manual_742520185.webp)
163
Using a Programming Console
Section 8-1
Different Keys
The following keys are labeled differently on the CQM1-PRO01-E and the
C200H-PRO27-E, but the operation of the keys in each pair is identical.
Note
To specify the AR area, use SHIFT and HR Keys for the C200H-PRO27-E and
use SHIFT and AR/HR Keys for the CQM1-PRO01-E/CQM1H-PRO01-E.
A shift symbol will be displayed in the upper-right corner of the screen when
the Shift Key is pressed. The shift input can be cleared by pressing the Shift
Key again.
Mode Switch
The mode switch controls the CPM2C-S’ operating mode. The key can be
removed when the switch is set to RUN or MONITOR but it cannot be
removed when the switch is set to PROGRAM.
Contrast Control
The display contrast can be adjusted with the control on the right side of the
Programming Console.
Buzzer Volume
The C200H-PRO27-E’s buzzer volume can be adjusted with the lever on the
right side of the Programming Console. The buzzer volume cannot be
adjusted on the CQM1-PRO01-E and CQM1H-PRO01-E.
Note
The buzzer volume can be turned on and off with a key operation. See
for details.
CQM1-PRO01-E and CQM1H-PRO01-E Keys
C200H-PRO27-E Keys
AR
HR
HR
SET
PLAY
SET
RESET
REC
RESET
Shift input
symbol
^
SHIFT
Contrast control
Low volume
High volume
C200H-PRO27-E
Summary of Contents for CPM2C-S100C
