![background image](http://html1.mh-extra.com/html/omron/cpm2c-s100c/cpm2c-s100c_operation-manual_742520090.webp)
68
Wiring and Connections
Section 3-4
!WARNING
The PC outputs may remain ON or OFF due to deposits on or burning of the
output relays or destruction of the output transistors. External safety mea-
sures must be provided to ensure safety in the system. Not providing proper
safety measures may result in serious accidents.
Note
When equipment must conform to the EC Directives (Low-voltage Directives),
use a power supply with double insulation or reinforced insulation.
!Caution
Check that wiring has been performed correctly before supplying power. Sup-
plying power with incorrect wiring may result in damage to internal circuits.
I/O Configuration
The following diagrams show the I/O configurations.
CPM2C-S100C and CPM2C-S100C-DRT (Sinking Transistor Outputs)
Don’t exceed the output capacity or the maximum common current for transis-
tor outputs shown in the following table.
Item
Specification
Output capacity
300 mA at 24 VDC
Maximum common current capacity
1.2 A/common
I/O connector
Load
24 VDC
Load
Load
Load
24 VDC
Summary of Contents for CPM2C-S100C
