![background image](http://html.mh-extra.com/html/omron/c200hw-clk21/c200hw-clk21_operation-manual_742483322.webp)
297
Status Area and Troubleshooting
Section 9-2
Network Participation Status: AR 08, AR 09, AR 12, AR 13
Communications Controller Hardware Error, EEPROM Error: AR 11, AR 15
Service Time: AR 16, AR 17
Operating Level Connection Status, Inconsistent Network Parameters: AR 24
Polling Node Address, Startup Node Address: SR 238, SR 242
Data Link Status: SR 239
to SR 241, SR 243 to
SR 245
When the data link status stored in the start word for the manual setting data
link table or automatic setting data link parameters is not set or is set to 0, the
data link status of only node addresses 1 to 6 will be displayed in the following
area.
Operating level 0
AR 08
AR 09
Operating level 1
AR 12
AR 13
The numbers in the squares indicate node addresses.
The corresponding node participation status is as follows:
0: Not part of network
1: Part of network
Operating level 0
AR 11
Operating level 1
AR 15
1: Communications controller hardware error
1: EEPROM error
Operating level 0
AR 16
Operating level 1
AR 17
The service time for each PLC cycle is calculated by the PLC
and displayed in 0.1-ms units in 4-digit BCD.
Operating level 1
Operating level 0
1: Network parameters do not match
1: Connecting to the operating level
Operating level 1
Operating level 0
Operating level 0
SR 238
Operating level 1
SR 242
Polling node address
Startup node address
Each node address is displayed in 2-digit BCD.
Summary of Contents for C200HW-CLK21
