-------------------------------- General: Equipment Guide ---------------------------------
Ultra v2.0a User Guide
A-20
A.5.3 Updating to the Latest Version
The following is an outline of the steps to follow to update the version of the software that you are
currently using to the latest version.
Note:
Details of the version you are currently using are given
on the
System
page of your
Ultra
’s
Configuration
window (see Section A.5.1).
Supplied alongside the new software will be a set of Software Upgrade Instructions that give full details
of the steps to take. The procedure starts with how to download the latest version of the software.
To update to the latest version:
1.
Use a web browser on any machine to visit the Omnitek website (
http://www.omnitek.tv
)
and call up the
Software Downloads
option on the Support page. The first time you do this,
use the form on this page to register a username and password to log-in to this website.
2.
Confirmation of your registration will be provided in an email. When this confirmation
arrives, return to the
Software Downloads
page of the Omnitek web-site, login, then
download the latest version of the
Ultra
software from the
Downloads
page that is displayed.
3.
Download a copy of the Upgrade Instructions provided alongside the new software, together
with any other documents you require.
4.
Either
: Put the software file(s) you downloaded on a USB memory stick. Turn your
Ultra
on (if not already turned on), then plug this memory stick into one of its USB ports.
Or
: Store these files on a PC on the same network as the
Ultra
.
5.
Follow the appropriate set of steps given in the Upgrade Instructions.
Note:
There is no need to formally unmount the USB stick at the end of the operation.
A.5.4 Installing Additional Facilities
The range of facilities that are supported on any
Ultra
is controlled through a set of licences
recorded in a Licence file. The licences that are currently installed are displayed on the
Licences
page of the Configuration window (see Section A.5.2).
When additional facilities are purchased, the Licence file needs to be updated. The procedure used
is as follows. It is in two parts – one carried out at the time the additional facilities are purchased;
the other carried out when the updated licence file is received from Omnitek.
To install additional facilities:
Steps at the time of purchase:
1.
Display the
Licences
page of the Configuration window.
2.
Take the
Fetch
option offered in the right-hand panel. This saves a copy of the current
Licence file as
Licences.lic
either in the Web Browser’s Downloads directory or, where the
Ultra
’s Local UI is being used, on a USB stick plugged in the back panel.
3.
Email a copy of this licence file to Omnitek/your Omnitek dealer as advised by your dealer.
Steps on receipt of the updated licence file:
1.
Copy the received licence file either to a directory on your Control device or to a USB stick.
2.
Turn on the
Ultra
and call up its User Interface in the usual way.
3.
Display the
Licences
page of the Configuration window.
4.
Take the
Update
option offered in the right-hand panel and use the file selector this
offers to open the new licence file.
5.
Restart the
Ultra
.
Summary of Contents for Ultra 4K Tool Box
