OmniTek Ultra 4K Tool Box, User Manual

Page: 15 / 140

-------------------------------- General: Equipment Guide ---------------------------------
Ultra v2.0a User Guide
A-7
A.2 Installation
The Ultra is supplied with both the software and the licenses that are required to support the instrument
options that have been purchased e.g. Eye support. So after a couple of preliminary steps (see below),
the job of installing the Ultra is simply one of placing the instrument where you want to use it and
attaching the appropriate cables.
A.2.1 Preliminary steps:
Checking the Pack Contents
Alongside the Ultra in the Ultra pack, you should find:

Appropriate national power cord (UK/US/Europe/Australia)
 USB Stick (in the mini-box)
Note: The pack may also include other items. A full packing list for the version of Ultra you have
bought will be included in the pack.
Before starting to install the
Ultra , check that you have received the items listed on the packing
list.
Note
: Any additional boards that are required to support additional application options you
have purchased will be already installed in the Ultra .
We recommend saving the shipping carton and all packing materials in case you subsequently
need to ship the Ultra anywhere.
A.2.2 Typical Set-Up
The typical set-up used to work with 4K input or output comprises:

Ultra and PSU
 PC/Handheld with Google Chrome/Internet Explorer/Opera/Safari/Firefox (version
38 or later) – to act as the Control device

4K monitor
with DisplayPort (DP) or HDMI input and preferably supporting 4Kp60

DP/HDMI cable

Ethernet cable for linking the Ultra to the same LAN as the Control device. (Where the
Ultra is not connected to a LAN/WAN, a router with DHCP capability must be used.)
This set-up is illustrated in the following diagram. The
Ultra
and the Control PC are linked via a
LAN, while the 4K monitor is attached to either the HDMI 1.4 output or the DisplayPort 1.2 output
as appropriate.
The various SDI inputs on the
Ultra are available for inputting signals for conversion and analysis
(and for output on any of the available output ports).
4K Monitor
LAN
HDMI (Optional connection)
Display Port
DHCP Router /LAN
Control PC
External Brick PSU
Ultra 4K Toolbox
Figure A-3: Typical set-up. This gives you controls and analysis displays on the Control PC, and
output on the DisplayPort or alternatively on the HDMI output port