Olivetti PF-P09 Service Manual Download Page 76

Page: 76 / 457

Field Service Ver. 1.1 May 2011

6. FIRMWARE UPGRADE

MAINTENANCE

A message appears, requesting confirmation to update the firmware. Click the [Start] to
begin transferring the firmware.

NOTE
• Do not turn off the printer while its firmware is being updated.

The result of the firmware transfer is displayed. Click the [Exit].

If the firmware was successfully updated, the printer will automatically restart.

Print [CONFIGURATION PAGE] to confirm the PS/PCL Firmware Version.

See P.154

<If spooling of the data fails>

For details, see “For a network connection.”
See P.31

A011F2E564DA

A011F2E565DA

d-Color MF2400

Summary of Contents for PF-P09







































































































































































































































































































































































































































































Search results

Summary of Contents for PF-P09

Reviews:

Related manuals for PF-P09

Brands by name

Popular brands

Olivetti PF-P09, Service Manual

Search results

Summary of Contents for PF-P09

Reviews:

Related manuals for PF-P09

Brands by name

Popular brands