Olivetti PF-P09 Service Manual Download Page 74

Page: 74 / 457

Field Service Ver. 1.1 May 2011

6. FIRMWARE UPGRADE

MAINTENANCE

The result of the firmware transfer is displayed. Click the [Exit].

If the firmware was successfully updated, the printer will automatically restart.

Print [CONFIGURATION PAGE] to confirm the PS/PCL Firmware Version.

See P.154

<If spooling of the data fails>

NOTE
• If spooling fails, data may remain in the printer spooler. Delete this data, and then

try again.

If spooling of the data fails, the following message appears.

Click [OK].

A011F2E560DA

A011F2E561DA

d-Color MF2400

Summary of Contents for PF-P09







































































































































































































































































































































































































































































Search results

Summary of Contents for PF-P09

Reviews:

Related manuals for PF-P09

Brands by name

Popular brands

Olivetti PF-P09, Service Manual

Search results

Summary of Contents for PF-P09

Reviews:

Related manuals for PF-P09

Brands by name

Popular brands