Olivetti PF-P09, Service Manual

Page: 221 / 457

13. SERVICE MODE Field Service Ver. 1.1 May 2011
178
ADJUSTMENT
/ SETTING
13.15.3 SERVICE ENGR ID
A. Use
• To register the service engineer ID.
• Use when registering and changing service engineer ID.
B. Procedure
• Enter a 7-digit code using the software keyboard.
(0000001 to 9999999)
13.15.4 SUBSCRIBE
• Not displayed when the machine is registered in the CS Remote Care center.
A. Use
• Sent the information to the CS Remote Care center to register the machine.
B. Procedure
1. Select [SERVICE MODE]
o
[PS / PCL]
o
[CS REMOTE CARE]
o
[SUBSCRIBE].
2. Press the Select key to start initial transmission.
13.15.5 MAINTENANCE START.
A. Use
• Starts the maintenance using the CS Remote Care.
• Not displayed in the following cases.
The machine is not registered in the center.
The Service Engineer ID is not registered.
The maintenance is already provided.
B. Procedure
1. Select [SERVICE MODE]
o
[PS / PCL]
o
[CS REMOTE CARE]
o
[MAINTENANCE
STRT].
2. Select [YES], and press the Select key to start the maintenance.
13.15.6 MAINTENANCE END.
A. Use
• Ends the maintenance provided by the CS Remote Care.
• Not displayed in the following cases.
The machine is not registered in the center.
The Service Engineer ID is not registered.
The maintenance is not provided.
B. Procedure
1. Select [SERVICE MODE]
o
[PS / PCL]
o
[CS REMOTE CARE]
o
[MAINTENANCE
END].
2. Select [YES], and press the Select key to finish the maintenance.
d-Color MF2400