Olivetti PF-P09, Service Manual

Page: 362 / 457

Field Service Ver. 1.1 May 2011 20. FAX ERROR
319
TROUBLESHOOTING
(25) Error code: 0044
(26) Error code: 0045
(27) Error code: 0046
(28) Error code: 0047
(29) Error code: 0048
(30) Error code: 0049
Definition Can not receive carrier /FSK signal within 6 sec. after sending MCF in ECM mode.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, and then ask sender resend again.
3. Boost the TX level of sender's machine.
4. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not receive any correct signal after sending RNR response with ERR signal.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
3. Boost the TX level of sender's machine.
Definition Receive incorrect signal when sending RNR which response with ERR signal.
Solution 1. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not receive correct signal after sending ERR signal.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
3. Boost the TX level of sender's machine.
Definition Can not receive correct signal after receive PPS_PRI_Q or PRI_Q, EOR_PRI_Q.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
3. Boost the TX level of sender's machine.
Definition Can not receive correct signal after sending PIP/PIN signal within 13 sec.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
3. Boost the TX level of sender's machine.
d-Color MF2400