Olivetti PF-P09, Service Manual

Page: 375 / 457

20. FAX ERROR Field Service Ver. 1.1 May 2011
332
TROUBLESHOOTING
(45) Error code: 00D0
(46) Error code: 00D1
(47) Error code: 00D2
(48) Error code: 00D3
(49) Error code: 00D4
(50) Error code: 00D9
(51) Error code: 00DA
Definition Received ERR signal after sending EOR_NULL.
Solution 1. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received incorrect response after sending PPS_EOP signal in V.34.
Solution 1. Change the machine TX speed to V.17, then resend again.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received DCN after sending PPS_EOP signal.
Solution 1. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received DCN after sending PPS_NULL signal.
Solution 1. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received DCN after sending PPS_EOM signal.
Solution 1. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not detect correct phase 3 signal after detect silence after phase 2.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Boost the machine TX level. <*1>
3. Change the machine TX speed to V.17, then resend again.
4. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not detect phase 4 signal within 30 seconds or remote side hang up over 6 sec-
onds.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Boost the machine TX level. <*1>
3. Change the machine TX speed to V.17, then resend again.
4. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
d-Color MF2400