Olivetti PF-P09, Service Manual

Page: 320 / 457

Field Service Ver. 1.1 May 2011 16. JAM DISPLAY
277
TROUBLESHOOTING
16.3.8 Misfeed at duplex paper transport section
A. Detection timing
B. Action
Type Description
Detection of
misfeed at duplex
paper transport
section • The duplex conveyance sensor (PS9) is not blocked even after the lapse of a
given period of time after the paper has unblocked PS9.
• The duplex conveyance sensor (PS9) is not unblocked even after the lapse of a
given period of time after the paper has blocked the exit sensor (PS8).
Detection of paper
left at duplex paper
transport section • The duplex conveyance sensor (PS9) is unblocked when the power switch is
turned ON, a door or cover is opened and closed, or a misfeed or malfunction is
reset.
Relevant Electrical Parts
Exit sensor (PS8)
Duplex conveyance sensor (PS9)
Duplex conveyance roller clutch (CL13) Printer control board (PRCB)
Main motor (M2)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical Com-
ponent)
1 Initial check items - -
2 Check the connector between M2-PRCB
PJ11 for proper connection and correct as
necessary. - -
3 Check the M2 connector for proper drive
coupling and correct as necessary. - -
4 Check the connector between PS8-PRCB
PJ15 for proper connection and correct as
necessary. - -
5 Check the connector between PS9-PRCB
PJ14 for proper connection and correct as
necessary. - -
6 Check the connector between CL13-relay
CN20-PRCB PJ14 for proper connection
and correct as necessary. - -
7 PS8 sensor check PRCB PJ15-9 (ON) H-8
8 PS9 sensor check PRCB PJ14-3 (ON) F-2
9 CL13 operation check PRCB PJ14-5 (REM) F-2
10 M2 operation check PRCB PJ11-10 to 13 B-8
11 Change PRCB. - -
d-Color MF2400