Olivetti PF-P09, Service Manual

Page: 229 / 457

14. SOFT SWITCH SET Field Service Ver. 1.1 May 2011
186
ADJUSTMENT
/ SETTING
14.2 Default setting
14.2.1 Country for each marketing area
NOTE
• A different country may be applicable depending on the communications stan-
dard.
• The marketing area settings is set in the procedure of [UTILITY]
o
[ADMIN. MAN-
AGEMENT]
o
[USER SETTING]
o
[PTT SETTING].
14.2.2 Soft switch list
Soft Switch No. Bit No. Designation Page No.
#01
3 Start key default for N-Scan
P.213
2/1 V.34 CI signal byte number
#02
8/7 Time between phase C to phase D signal in V.17
P.214
6 Header TX selection open to user
5 Confirm fax No.
3/2 Transmit RTN/RTP/MCF signal level criteria
1 Sent N.G page
#03
8 Send out NSF frame with station ID
P.215
7 Number of Pause within phone number
6 Re-dial prohibit for no answer
4/3/2/1 RX level setting
#04
4 Visible alarm for RTN signal
P.216 3 Audible alarm for RTN signal
2/1 Pulse shape
#05
8/7 Push button ON/OFF timing (PB)
P.217
6/5 Relation between 10 key # & No. of dial pulse
4 10 PPS/20 PPS
3/2/1 PPS ratio
#06 5 The time switch line to external phone after dialing the last digits P.218
#07
8 Dial tone or busy tone detection
P.218
7 PSTN/PBX setting
6 PBX dial tone detect
5 Dial mode select
4/3/2/1 TX level select for PSK/FSK
#08
7 Detect busy tone after dialing
P.219
6 Sending CED signal after connection
#09
8/7 Ringer frequency detection
P.219 5 TSI/CSI append “+”
2/1 Time from RX DIS signal to send DCS signal
d-Color MF2400