Oki OKIFAX 5650, User Manual

Page: 45 / 138

English
Chapter 2 - Installation 33
1. Press the SELECT FUNCTION key.
2. Press the 9/USER PROG. One Touch key. The display will prompt
for a selection.
3. On the numeric keypad, press 2. The display confirms that dial
parameter has been requested
4. Press the YES key until the display prompts for selection of PBX
line OFF.
5. Press the NO key. The display prompts for selection of PBX line
ON.
6. Press the YES key until the display prompts for selection of Dial
prefix OFF.
7. Press the NO key. The display changes, and prompts for entry of the
dial prefix.
8. Using the numeric keypad, enter the number you normally dial from
your PBX to obtain an outside line.
Note : If the dial prefix is a single digit (e.g. 9), then it is necessary to
enter either three spaces with the SPACE One Touch key before
the single digit (e.g. 9) or three spaces after the single digit (e.g. 9).
9. Press the YES key.
10. Press the SELECT FUNCTION key to finish.
Note 1 : The DIAL PREFIX number of your PBX LINE must be included
in all outside telephone numbers you program into your fax
machine or dial with the numeric keypad.
Note 2 : To later turn off the PBX LINE and DIAL PREFIX functions,
follow Steps 1 - 7 above. At Step 8, press the
SPACE One
Touch key four times, then continue with Steps 9 - 10.
MFP function
To use your fax machine as a PC printer/fax/scanner, you will need to
install optional Multi-Function Peripheral (MFP) software into your
computer. For details on how to use your fax machine as an MFP, please
refer to the documentation that comes with the MFP software.