Oki OKIFAX 5650, User Manual

Page: 104 / 138

English
92
MF(TONE) DURATION: If your fax machine is set to tone dialling, this
function controls the duration of the tones used for dialling (the tone duration
varies in different countries). Available settings are 75 ms, 85 ms, and 100 ms.
PBX LINE: Turn this function on if your fax machine is connected to a PBX.
Once this function has been turned on and the dial prefix function has been
programmed, your fax machine will recognize the dial prefix number you use
in your PBX to get an outside line. After it dials your dial prefix number, your
fax machine pauses to wait for an outside line before dialling the rest of the
telephone number. Available settings are ON and OFF. See Connecting to a
PBX in the Installation chapter for instructions on changing this setting.
FLASH/EARTH/NORMAL: If your fax machine is connected to a PBX,
this function tells your fax machine about the type of PBX line your fax
machine is connected to. Available settings are normal (N), flash (F) and earth
(E).
AUTO START: When this function is turned on, your fax machine
automatically begins dialling as soon as you have selected a location by
pressing a One Touch key or entering an Auto Dial code. You do not have to
press the Start key. Available settings are ON and OFF
.
DIAL PREFIX : If your fax machine is connected to a PBX, use this function
to tell your fax machine what access number is used to obtain an outside line
from your PBX. You can enter up to 4 digits. See “Connecting to a PBX”
in Installation for instructions on changing this setting.
Changing dial parameter settings
1. Press the SELECT FUNCTION key.
2. Press the 9/USER PROGRAM One Touch key. The display
confirms that Functional Programming has been selected.
3. Using the numeric keypad, press number 2. The display confirms
that dial parameter has been selected.
4. Press the YES key until the display shows the dial parameter you
want to change.
5. Repeatedly press the NO key until the setting you want appears in
the display.
6. Press the YES key to confirm your selection. The name of the next
dial parameter setting will appear in the display.
7. Press the SELECT FUNCTION key to finish.