Oki OKIFAX 5650, User Manual

Page: 110 / 138

English
98
Codes used in reports
Result codes
The following codes indicate the results of communications.
Communication codes
The following codes indicate the communication mode used for a
communication.
Code Explanation
BUSY The line of the remote location was busy or there was no answer.
CANCL
A confidential message was erased after being held in memory for 10
days.
COMP. A multiple-location transmission was completed.
COVER
The cover of your fax machine was opened during the communication. As
a result the machine was unable to receive the entire message in memory.
NO Transmission or reception failed due to a communications error.
OK Transmission or reception was completed successfully.
PUNIT There is a problem with the printing unit. Contact service representative.
R_JAM
A paper jam occurred while receiving a fax, so the machine was unable to
receive the entire message in memory.
S_JAM A document jam occurred in the document feeder of your machine.
STOP STOP key was pressed, ending the session.
PAPER The communication failed because the receiving machine ran out of paper.
Code Explanation
TX A communication initiated by your fax machine.
RX A communication initiated by a remote fax machine.
POLL RX Standard or ITU polling reception
POLL TX Standard or one-time polling transmission
POLL=** Standard or ITU bulletin polling transmission (** is the mailbox number)
CONF=** Confidential reception (** is the mailbox number)
FWD-T Forwarding transmission
FWD-R Forwarding reception
B.C. Broadcast transmission