Oki OKIFAX 5650, User Manual

Page: 134 / 138

English
122
Other related functions
The following are a few related functions incorporated to enhance faxing
operations.
Automatic Fallback: If the G4 signal transmitted from the machine is
rejected by the remote location, the machine will automatically retransmit
the signal in G3 mode. Similarly, if a G3 signal is received for an in-
coming call, the machine will automatically switch to the G3 mode for the
call.
Resolution Conversion: The resolution of a fax is converted according to
the resolution of the document and the capacity of the receiving machine.
Coding Conversion: The coding scheme of the communication is
converted according to the scheme for the transmitted document and the
capacity of the receiving machine.
Call Origination: Dialling can be done manually using the numeric key-
pad or via auto dial numbers.
Call Termination: This function provides immediate answering and the
ability to select the type of termination setting (FAX, TEL, MEM, PC or
FWD).
Direct Dialling In Service: In this service available in point-to-
multipoint transmissions, numbers can be assigned to terminals in addi-
tion to their subscriber numbers. This service makes it possible to termi-
nate calls at specified terminals.
Multiple Subscriber Number (MSN) Restriction: This function is used
in combination with direct inward dialling to check if the number of the
incoming call matches an MSN in the machine’s database. If not, the call
is rejected.
Sub-Address Service: Sub-addresses are most commonly used when
faxing point-to-multipoint (P-MP). In addition to the telephone number of
the remote location, the user must also know and input the sub-addresses
of the terminals that the fax is directed to.
For more detailed information and instructions on how to set/use a
machine when the ISDN G4 Board is installed, please refer to the hand-
book provided with the ISDN G4 Board.