Oki OKIFAX 5650, User Manual

Page: 44 / 138

English
32
Setting language
Your fax machine comes with two languages installed, which appear on
the display and in reports. Follow the instructions below to switch
languages.
Note: Your supplier may be able to provide you with additional
languages
.
1. Press the SELECT FUNCTION key.
2. Press the 9/USER PROG. One Touch key. The display will prompt
for a selection.
3. Press the YES key.
4. Using the numeric keypad, enter 14. The display confirms that the
user language program has been selected.
5. Press the NO key to switch to the other installed language.
6. To accept the language change, press the YES key.
7. Press the SELECT FUNCTION key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private telephone system used to
route internal calls. If you have to dial a prefix (access) number to get an
outside line, then your line is connected to a PBX.
If you hear a secondary dial tone after dialling the access number, follow
the instructions below. If not, set PBX off and simply insert the access
code required in front of the dialled number string.
If you are connecting your fax machine to a PBX, follow the instructions
below. These setting changes allow your fax machine to identify your
PBX’s outside line dial prefix digits in the numbers that you program or
dial in your fax machine. After it dials the prefix digits, your fax machine
will wait until it sees that an outside line is available before dialling the
rest of the number.
Note : In some countries you may require service assistance to make
these changes. Also, some PBX installations may require
additional adjustments to your fax machine. If you continue to
have difficulty with fax communication after following these
steps, contact your supplier.