[62] Unlock the Media Shaft Core Locks
2.
To unlock the media shaft core locks (1) turn counter-clockwise with the
supplied 5mm hex key (2).
3.
Slide a new roll of media onto the supply shaft.
4.
Roughly center the roll on the shaft, and then insert the shaft into the
Supply (bottom) position on the printer. Insert one end of the shaft at a
time.
NOTE
Load the shaft with the core lock and coupler end on the right side of the
printer.
5.
Accurately center the media using the supplied ruler. Media should be
centered within 1mm on the ruler.
How to Load Media
124
Chapter 7 - How to Operate the Roll Media Option
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
