How to Access the Spot Layer Tool
Procedure
1.
Open a print job in Preflight using an ONYX profile (media model) that
contains spot data channels.
2.
Select the Color Corrections tab.
3.
Click on Tools and select Spot Layer Tool. This will open the feature set.
NOTE
If the Enable checkbox won't activate, the media you used to open the job
has not been configured with the Quality-Layered print mode. Create or
Edit your media to support spot ink in Media Manager before you open
the job in Preflight (or download a white ink media model from the web
site).
[86] ONYX Profile with Spot Channels
How to Access the Spot Layer Tool
168
Chapter 9 - How to Work With White Ink and Varnish
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
