Illustration
[122] Remove the Quick-Release Coupler
IMPORTANT
For personal safety, we recommend that the operator always wear nitrile
gloves, a protective apron, and safety glasses with side shields when
handling inks.
Procedure
1.
Open the clear plastic door on the Ink Station.
2.
Identify the the ink bag to be replaced.
3.
Press the quick-release coupler button at the bottom corner of the ink bag.
4.
Unhook the bag from the top of the ink station.
5.
Replace with a new ink bag of the same color.
6.
Push the quick-release coupler at the bottom corner of the new bag into
place.
NOTE
If you place a bag in the wrong ink station (for example, yellow ink in the
black ink station) the display will show an error message and the printer
will not print until the correct bag is installed.
How to Change Ink Bags
214
Chapter 10 - Ink System Management
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
