Leader & End of Roll Waste
Leader Waste
: 560mm (22 inches)
Leader waste is the amount of media that cannot be printed between the
roll media platen and the take-up media roll. This waste is produced every
time media is loaded, taped to the take-up core and initialized in
preparation for the first print. Trailer waste is the media that cannot be
printed at the end of the supply media roll. This will vary slightly
depending on the attachment method that was used to secure the media
to the media core.
End of Roll Waste
(minimum possible): 920mm (36 inches)
End of roll waste is the media that cannot be printed at the end of the
supply media roll. This will vary slightly depending on the attachment
method that was used to secure the media to the media core.
Roll Media Option Specifications
Chapter 7 - How to Operate the Roll Media Option
117
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
