Printer Interface Software
Introduction
The printer software is displayed on the LCD monitor. The interface has six
main modules that are accessed by tabs located at the bottom of the
display. Click on these tabs to access the modules. Print Job Control is the
default module displayed when the software has finished loading after the
printer is switched on or reset.
The Print Job Control display is divided into functional and status areas.
The functional areas supports all operator input necessary to operate,
maintain and service the printer. The status areas are used to report printer
status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device to navigate the menu-based interface.
For operations that require operator input, the mouse is used to select
either numeric characters from a virtual keypad or alphanumeric charaters
from a virtual keyboard. These virtual input screens are displayed on the
interface LCD monitor when data entry is required.
Illustration
[32] Virtual Keyboard
Printer Interface Software
Chapter 4 - How to Navigate the User Interface
45
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
