6.
To remove the take-up roll without manually rolling up the media, tap the
right pedal momentarily to rotate the take-up shaft one revolution to the
unlocked position in the forward direction.
7.
If you want to change the supply shaft, momentarily press the left pedal to
rotate the shaft to the unlocked position.
8.
Remove the supply shaft from the printer by pulling it towards you. Pull
one end out at a time.
9.
Place the media shaft on a suitable work surface.
10.
Unlock the media shaft core locks using a 5 mm hex key.
11.
Slide the media core off the shaft.
Result
The media is removed and you can now add a different media to the shaft.
How to Unload and Remove Media
Chapter 7 - How to Operate the Roll Media Option
133
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
