How to Manage Print Jobs
Daily Start-up and Shut-down - Start-up Procedure
Introduction
Keep your printer clean and perform all recommended scheduled
maintenance to ensure that the printer is ready to produce optimal quality
images.
When to do
The start-up procedure must be performed every morning or after a period
of time when the printer has not been used. The shut-down procedure
indicated here is for the end of a regular workday. If the printer is shut
down for longer periods of time than a few days, then there are more
considerations, as documented in the previous section on How to Switch
the Printer Off (see the note on Extended Power Off).
Procedure
1.
Turn on the ink heater (click on the Ink Temperature Control icon located
on the Command Toolbar of the Job Control screen).
2.
Clean the carriage underside.
3.
Perform Printhead Maintenance after the ink temperature has reached at
least 40° C (104° F).
NOTE
Refer to the Maintenance chapter for details on how to perform these
procedures.
Daily Start-up and Shut-down - Shut-down Procedure
Procedure
1.
Turn off the UV lamps (click on the lamp icon located on the Command
Toolbar of the Job Control screen).
2.
Turn off the table vacuum.
3.
If it is the end of the work week, swab the printheads.
4.
Turn off the ink heater (click on the Ink Temperature Control icon located
on the Command Toolbar of the Job Control screen).
How to Manage Print Jobs
86
Chapter 5 - How to Operate Your Océ Arizona Printer
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
