Océ VarioLink 2221, User Manual

Page: 280 / 425

8
Application functions
8-8 VarioLink 2221/2821/3621
App
lica
tio
n f
unct
ions
Chapter 8
8.3 Inserting paper between overhead projector trans-
parencies (“OHP Interleave” function)
In order to prevent copies printed onto overhead projector transparencies
from sticking together as a result of the heat that is produced during copying,
paper (interleaves) can be inserted between the transparencies.
Select either “With Image” or “Blank” to specify whether or not the copy is
printed onto the interleaves.
To copy using the “OHP Interleave” function
0 No Finishing setting can be used.
0 The number of copies is set to “1” and cannot be changed.
1
Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2
Load the overhead projector transparencies into the bypass tray, and
load the interleaf paper into the desired paper tray.
– For details on loading overhead projector transparencies, refer to
“Paper types and paper capacities” on page 7-4, “Loading paper
into the bypass tray” on page 2-60, and “To specify a setting for
special paper (Change Setting)” on page 7-15.
– Use interleaf paper with the same size as the overhead projector
transparencies, and load them in the same orientation as the trans-
parencies.
E F G H
E F G H
E F G H E F G H
E F G H
E F G H
E F G H
E F G H
E F G H E F G H
E F G H
E F G H
E F G H
E F G H
E F G H
E F G H
E F G H
E F G H E F G H
E F G H
E F G H
With the “Blank”
setting With the “With Image”
setting