Océ VarioLink 2221, User Manual

Page: 396 / 425

11
Utility mode
11-54 VarioLink 2221/2821/3621
Utility mode
Ch
apt
er
11
Specifying that the “Auto Paper Select” setting and the “Auto Zoom”
setting can be selected at the same time (mode 403)
If a paper tray is selected while the “Auto Paper Select” setting is specified,
the “Auto Zoom” setting can be set automatically.
Settings at time of purchase
Specifying the setting
The shaded cells indicate the settings selected at the time of purchase.
6 Specify whether to
enlarge the upper-left
corner of the screen
or wait for instruc-
tions on the area to
display enlarged
when the [Enlarge
Display] key is
pressed. 0 Waits for instructions
on the area of the
screen to be dis-
played enlarged.
1 Enlarges the upper-
left corner of the
screen.
5, 4, 3, 2, 1, 0 ----------------------- 000000
*
Do not change these
bits when specifying
settings for this func-
tion.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 1 (HEX: 01)
Bit Description Setting Description
7 ----------------------- 0
*
Do not change this
bit when specifying
settings for this func-
tion.
6 Specifies the units
used to display and
specify lengths
shown in the screens. 0 The “Auto Zoom” set-
ting cannot be speci-
fied at the same time.
1 The “Auto Zoom” set-
ting can be specified
at the same time.
5, 4, 3, 2, 1, 0 ----------------------- 000001
*
Do not change these
bits when specifying
settings for this func-
tion.
Bit Description Setting Description