Océ VarioLink 2221, User Manual

Page: 119 / 425

Basic copy operation
3
VarioLink 2221/2821/3621 3-3
Ba
sic co
py ope
ra
tio
n
Chapter 3
3
Specify the desired copy
settings.
– The factory default
settings for this ma-
chine are listed be-
low.
Paper: Auto Paper
Zoom: ×1.000 (Full
size)
Simplex/Duplex: 1
%
1
Quality/Density: Text
– For details on specifying document settings, refer to “Specifying
document settings” on page 3-16.
– For details on selecting a paper source setting, refer to “Selecting
a Paper setting” on page 3-24.
– For details on specifying a Zoom setting, refer to “Specifying a
Zoom setting” on page 3-27.
– For details on selecting a Simplex/Duplex setting, refer to “Select-
ing single-/double-sided settings for originals and copies” on
page 3-39.
– For details on selecting the quality of the document and the copy
density, refer to “Specifying document quality/density settings” on
page 3-43.
– For details on specifying combined copy settings, refer to “Select-
ing a Combine Originals setting” on page 3-46.
– For details on specifying Finishing settings, refer to “Selecting fin-
ishing for copies” on page 3-50.
– For details on selecting the binding setting, refer to “Creating book-
let copies (“Booklet” function)” on page 8-22.
– For details on specifying settings for the Application functions, refer
to “Application functions” on page 8-2.
4
Using the keypad, type
in the desired number of
copies.
– If the number of cop-
ies was incorrectly
entered, press the
[C] (clear) key in the
keypad, and then
specify the correct
number of copies.