Copyright 2010-2015 Obihai Technology, Inc.
97
natively on the phone (per service). To use the version that is provided by the soft-switch, the administrator should
disable the corresponding service on the phone to avoid ambiguity.
In addition to going through the Net Services app, the following methods of access are available:
•
Feature Key: Define a feature key with the function Call Forward. Set the Service parameter of the key to the
SP service that provides this feature
•
Soft Key: The Call Forward soft key on the home screen of the phone can be mapped to the network provided
CallForwardAll service on a specific SP service, by setting the parameter
Phone Settings – User Preferences
Settings
::
CallForwardUnconditionalFeatureProvider
to equal to that SP service
•
User Preferences – Call Forward Setting: As a side effect of enabling the Soft Key option in the last item, the
Call Forward Setting under User Preference app on the GUI is also pointing to the same network provided
CallForwardAlways feature
The user can enable/disable CallForwardAlways as well as setting a forwarding number; the settings are stored on the
server.
Call Forward Busy
To make this function available on the phone, you must enable the option
SPn Service – Network Provided
Services
::
CallForwardBusy
. This feature is similar to the CallForwardOnBusy feature that is available natively on the
phone (per service). To use the version that is provided by the soft-switch, the administrator should disable the
corresponding service on the phone to avoid ambiguity.
The only way of access from the phone is by going through the Net Services app. The phone allows the user to get and
set this feature on the server; the setting is stored on the server.
Call Forward No Answer
To make this function available on the phone, you must enable the option
SPn Service – Network Provided
Services
::
CallForwardNoAnswer
. This feature is similar to the CallForwardOnNoAnswer feature that is available
natively on the phone (per service). To use the version that is provided by the soft-switch, the administrator should
disable the corresponding service on the phone to avoid ambiguity.
The only way of access from the phone is by going through the Net Services app. The user can enable/disable the
feature, set the forwarding number, and also the number of rings before forwarding the call; the setting is stored on
the server.
Anonymous Call
To make this function available on the phone, you must enable the option
SPn Service – Network Provided
Services
::
AnonymousCall
. This feature is similar to the AnonymousCall feature that is available natively on the phone
(per service). To use the version that is provided by the soft-switch, the administrator should disable the corresponding
service on the phone to avoid ambiguity.
In addition to going through the Net Services app, the following methods of access are available:
•
Feature Key: Define a feature key with the function
Block Caller ID
. Set the Service parameter of the
key to the SP service that provides this feature
The user can enable/disable this feature from the GUI; the setting is stored on the server.
Do Not Disturb
To make this function available on the phone, you must enable the option
SPn Service – Network Provided
Services
::
DoNotDistrub
. This feature is similar to the DoNotDisturb feature that is available natively on the phone
(per line). To use the version that is provided by the soft-switch, the administrator should disable the corresponding
feature on the phone to avoid ambiguity.
