Obihai OBi1062 Administration Manual Download Page 186

Page: 186 / 220

186

X_UseAnonymousFROM

Enable the use of “sip:anonymous@localhost” in FROM

header of SIP INVITE when attempting to make an

anonymous call

false

X_SessionRefresh

Enable session refresh signaling (with SIP Re-INVITE)

during a connected call. This allows the OBi to detect if the

connection with the peer is broken abnormally so it can

release the call. Disable this option if the ITSP does not

support Re-INVITE sent from the client device.

true

X_SessionTimer

Enable standard session timer behavior based on RFC4028

false

X_SessionExpires

Session Expires before value. If session refresh is enabled,

OBi will refresh half-time before the session expires.

X_AccessList

A comma separated list of IP addresses such that the

device only accepts SIP requests coming from one of the

given addresses. If the list is empty, the device accepts SIP

requests from any IP address

X_InsertRTPStats

Enable the device to include a X-RTP-Stat header in a BYE

request or 200 response to BYE request at the end of an

established call. This header contains a summary of RTP

statistics collected during the call.

true

X_MWISubscribe

Enable this option to have the device SUBSCRIBE to the

message-summary event package to support MWI and

VMWI service.

Note that device handles NOTIFY of this event package

regardless MWISubscribe is enabled or not

false

X_MWISubscribeURI

Blank implies to use the same URL as REGISTER for the TO

and FROM header as well as the Request-URI

Otherwise, if the URI does not contain ‘@’, it is user as the

userid field in TO/FROM header as well as the Request-

URI, which are otherwise same as REGISTER

If the URI contains ‘@’, it is used in the TO and FROM

header as well as the Request-URI as is

Note that OBi device forms the Request-URI of SUBSCRIBE

the same way as the TO header, with an additional port

number

X_MWISubscribeExpires

X_MWISubscribeExpires: periodic interval to renew

SUBSCRIBE (default 3600s)

3600

X_RegSubscribe

Enable subscription to the reg event package

false

X_RegSubscribeExpires

reg event subscription expires value

3600

X_BLFSubscribeExpires

BLF subscription Expires value

3600

X_ShareLineMethod

The signaling method to use for shared line/share call

appearances. The following choices are supported:

call-info

dialog;sla

dialog;ma

call-info

X_CallInfoSubscribeExpires

Call-Info subscription Expires value

3600

X_BWCallParkSubscribeExpires

Call-Park subscription Expires value

3600

Summary of Contents for OBi1062



























































































































































































































Search results

Summary of Contents for OBi1062

Reviews:

Related manuals for OBi1062

Brands by name

Popular brands

Obihai OBi1062, Administration Manual

Search results

Summary of Contents for OBi1062

Reviews:

Related manuals for OBi1062

Brands by name

Popular brands