Obihai OBi1062 Administration Manual Download Page 194

Page: 194 / 220

194

is not answered after a period as specified in

CallForwardOnNoAnswerRingCount. If

CallForwardOnNoAnswerNumber is blank, this

parameter is treated as if it has been set to No.

Note: It is possible for a user to set this parameter from

the phone using a Star Code

CallForwardOnNoAnswerNumber

Directory number to forward all incoming calls when

the call is not answered after a period specified in

CallForwardNoAnswerRingCount

Note: It is possible for a user to set this parameter from

the phone using a Star Code

CallForwardOnNoAnswerRingCount

Number of rings to be considered by the device as no

answer to an incoming call.

Note: 1 ring is approximately 6s

BlockedCallers

A comma separated list of up to 10 caller numbers to

block from calling this service

MWIEnableMask

Enable Message Waiting Indication from this service on

one or more phone ports. It is specified as a bit mask,

such that bit 0 for Phone 1, bit 1 for phone 2, etc.

255

X_VMWIEnableMask

Enable Visual Message Waiting Indication for this

service on one or more phone ports. It is specified as a

bit mask, such that bit 0 for Phone 1, bit 1 for phone 2,

etc.

255

MessageWaiting

This is a state rather than a configuration parameter,

that indicates if there are any new messages for this

subscriber on the service provider’s voicemail system

false

AnonymousCallBlockEnable

Enable blocking of Anonymous Calls on this service.

Anonymous calls are rejected with a SIP 486 (Busy)

response and Call Forward On Busy service is not

applied.

Note: It is possible for a user to set this parameter from

the phone using a Star Code

false

AnonymousCallEnable

Enable masking of Caller-ID information for all outgoing

calls. If enabled, the called party should perceive the

call as coming from an anonymous caller.

Note: It is possible for a user to set this parameter from

the phone using a Star Code

false

DoNotDisturbEnable

Enable Do Not Disturb Service. If enabled, all incoming

calls on this service are treated as if the device is busy.

Note: It is possible for a user to set this parameter from

the phone using a Star Code

false

X_BridgedOutboundCallMaxDuration

Limit on the call duration in seconds for all outbound

calls that are bridged from the same or another trunk. A

blank or 0 value implies the call duration is not limited.

X_AcceptDialogSubscription

Enable the device to accept SUBSCRIBE to this trunk’s

false

Summary of Contents for OBi1062



























































































































































































































Search results

Summary of Contents for OBi1062

Reviews:

Related manuals for OBi1062

Brands by name

Popular brands

Obihai OBi1062, Administration Manual

Search results

Summary of Contents for OBi1062

Reviews:

Related manuals for OBi1062

Brands by name

Popular brands