Obihai OBi1062 Administration Manual Download Page 37

Page: 37 / 220

Networking Features

OBi1000 offers two physical interfaces for networking: Ethernet (described as “WAN” in the configuration) and WiFi.

Both interfaces may be used at the same time, but Ethernet will take precedence in ambiguous cases.

Ethernet Ports

The OBi has a 3-port switch, one of which is connected internally to the phone processor for traffic to and from the OBi,

with the other 2 ports exposed to the outside world via two RJ45 connectors on the back of the devices. The two

exposed ports are labeled SW and PC. The SW port should be connected to the Ethernet switch and the PC port used to

daisy chain a PC or other Ethernet-connected device. While the SW port supports PoE, the PC port does not, but

otherwise the two ports are totally symmetrical.

At present there are no configurable options for either of the external Ethernet Ports.

WAN Interface

The WAN interface on the phone refers to the internal Ethernet switch port that is connected directly to the phone

processor. The following setting groups are available.

VLAN

The OBi1000 supports VLAN tagging in compliance with 802.1p/q. If

WAN Settings – Internet Settings

VLANEnable

is enabled, outbound traffic will be tagged according to the parameters

VLANID

and

VLANPriority

. The phone will

ignore inbound traffic that does not belong to the same VLAN.

LLDP

The OBi supports LLDP-MED to automatically discover Network Policy (VLAN and DSCP) settings and perform other

related handshake functions. This feature is enabled using the parameter

WAN Settings – Internet Settings

LLDP-

MED

IP Address Assignment

The OBi supports 3 methods of acquiring an IP address assigned to its WAN interface. The method to use is controlled

by the parameter

WAN Settings – Internet Settings

AddressingType

, which can have one of the following values:

•

DHCP

: Request address assignment from a DHCP server

•

PPPoE

: Request address assignment from a PPPoE server

•

Static

: Use the statically assigned IP address, subnet mask, and default gateway from the parameters

WAN

Settings – Internet Settings

IPAddress

SubnetMask

, and

DefaultGateway

respectively

DNS Servers

You can specify up to two DNS servers to be used with the WAN interface in the parameters

WAN Settings – Internet

Settings

DNSServer1

and

DNSServer2

. Note that if the DHCP offer includes DNS Servers, the OBi takes up to 16

servers from the list and uses them together with the explicitly configured servers.

Summary of Contents for OBi1062



























































































































































































































Search results

Summary of Contents for OBi1062

Reviews:

Related manuals for OBi1062

Brands by name

Popular brands

Obihai OBi1062, Administration Manual

Search results

Summary of Contents for OBi1062

Reviews:

Related manuals for OBi1062

Brands by name

Popular brands