Copyright 2010-2015 Obihai Technology, Inc.
205
the user by hook flashing the phone in one of the
following scenarios:
- One call on hold while a 2
nd
outgoing call ringing
- One call on hold while a 2
nd
outgoing call
connected
We refer to case (1) as an early conference, where
the second conferee is still ringing; the other 2
parties may converse while hearing ringback tone
in the background until the 3 party answers. In
either case, the user can end the call with the
second conferee by hook flashing another time
and the call reverts to a 2-way call.
If Conference Call service is disabled, then hook
flashing the phone resumes the holding call but
ends the second outgoing call in scenario (1), and
swaps between the two calls in scenario (2) (as in a
call waiting situation)
UseExternalConferenceBridge
Use external conference bridge when starting a
conference call
false
CallWaitingEnable
Enable call waiting service. Call Waiting is the
situation where a new incoming call is routed to
the PHONE port when there is already another call
connected. If this service is enabled, OBi plays call-
waiting tone to alert the user, as well as generates
CWCID signal if CWCID is enabled. The user may
then swap between the two calls by hook flashing.
If the service is disabled, OBi rejects the incoming
call as busy.
Note: It is possible for the user to set this
parameter from the phone using a Star Code
true
DoNotDisturbEnable
DoNotRingEnable
AnonymousCallBlockEnable
AnonymousCallEnable
CallForwardUnconditionalEnable
CallForwardUnconditionalNumber
CallForwardOnBusyEnable
CallForwardOnBusyNumber
CallForwardOnNoAnswerEnable
CallForwardOnNoAnswerNumber
CallForwardOnNoAnswerRingCount
JoinPageGroup1
JoinPageGroup2
AutoAnswerEnable
ToneProfile
Select a Tone Profile for call progress tone
generation. Choices are A, or B
A
StarCodeProfile
Select a Star Code Profile for interpreting Star
A
