Obihai OBi1062, Administration Manual

Page: 196 / 220

Copyright 2010-2015 Obihai Technology, Inc.
196
ExecutiveAssistant false
Hoteling false
RemoteOffice false
SecurityClass false
SimultaneousRing false
Netwrok Directory Setup (VoiceService.1.VoiceProfile.1.Line. n .X_NetServices.Dir.), n = 1 – 6
EnableGroup true
EnableGroupCommon true
EnableEnterprise true
EnableEnterpriseCommon true
EnablePersonal true
Buddy List Setup (VoiceService.1.VoiceProfile.1.Line. n .X_NetServices.BuddyList.), n = 1 – 6
ServerType BroadSoft
Priority 33
VerifyServerCert false
QueryVcard false
OBiTALK Service Configuration
Parameter Description Default Setting
OBiTALK Service Settings (VoiceService.1.X_P2P.1.)
Enable
Enable the OBiTALK Service (the built-in free voice service
that comes with every OBi Device)
true
LocalPort The UDP or TCP port used by device to send and listens for
OBiTALK messages
10000
TryMultiplePorts Enable the unit to try a few random UDP ports until it can
successfully join the OBiTALK network
true
DisplayName Display name to identify the subscriber, for the purpose of
displaying a Caller ID Name on the recipient’s device
DigitMap Digit map to restrict numbers that can be dialed or called
with this service. See OBi Call Routing and Digit Map Section
for a description of the syntaxes for specifying a Digit Map.
(<ob>xxxxxxxxx|obxxxxxxxxx)
InboundCallRoute Routing rule for directing incoming calls on this service. The
default rule is to send all incoming calls to the PHONE port
(ph). See OBi Call Routing and Digit Map Section for a
description of the syntaxes for specifying this parameter
ph,ph2
RingProfile Select a Ring Profile to ring the PHONE port with when an
incoming call is routed to the PHONE port. Choices are A, or
B
A
CodecProfile Select a Codec Profile to be used for all calls on this service.
Choices are A, or B.
A
DefaultRing Default ring pattern number to ring the PHONE port for
incoming calls on this trunk that are routed to the PHONE
port according to the InboundCallRoute of this service. The
ring pattern is taken from the selected Ring Profile. Valid
choices are 1-10
2
CallOnHoldRing Pattern to ring PHONE port when holding a call on this
trunk that has been connected to the PHONE port. Typically
8