Copyright 2010-2015 Obihai Technology, Inc.
191
header (which is the local account userid). If user is
specified, it will be used as the userid in the Request-
URI and TO header.
SIP messages for keep-alive are sent only once without
retransmission; response to the SIP messages are
ignored by the OBi.
X_UserAgentPort
UDP port where the device sends and listens for SIP
messages
5060
X_UserAgentPorts
A comma separated list of (up to 10) alternative user
agent ports to use when there is no response received
from the SIP Registrar
DirectoryNumber
Directory number associated with this service
X_DefaultRing
Default ring pattern number to ring the PHONE port for
incoming calls on this trunk that are routed to the
PHONE port according to the InboundCallRoute of this
service. The ring pattern is taken from the selected Ring
Profile. Valid choices are 1-10
1
X_CallOnHoldRing
Pattern to ring PHONE port when holding a call on this
trunk that has been connected to the PHONE port.
Typically this is a very short distinctive ring pattern that
serves as a reminder to the user that a call is being on
hold. The ring pattern is taken from the selected Ring
Profile. Valid choices are: NO Ring, or 1-10
8
X_RepeatDialRing
The ring pattern number to use to ring the PHONE port
when a repeat dial operation on this trunk is successful
as the called party is either ringing or answered
5
X_BargeInRing
Call Waiting Ring pattern to ring the PHONE port when
the incoming call is requesting to barge-in. This is
applicable in a call-waiting scenario on the PHONE port
4
X_CallParkedRing
Ring pattern to ring the PHONE port only as a reminder
that there are some calls parked in the parking lot. This
feature is applicable only in an OBiPLUS solution.
10
X_SipDebugOption
Enable sending of SIP signaling debug information to
the syslog server (if one is configured on the device).
Available choices are:
Disable (do not send SIP signaling debug information)
Log All Messages
Log All Except REGISTER Messages
Disable
X_SipDebugExclusion
A list of SIP methods to exclude from the syslog for this
SP service. For example:
notify, subscribe
X_SatelliteMode
Enable satellite mode on this trunk. In this mode, the
user must explicitly sign on (using * code) to receive
phone calls on this trunk. The SIP REGISTER sent by the
OBi to the ITSP on this trunk will indicate if the user
wants to sign on (and therefore takes over the incoming
calls for this account). This feature is only applicable if
false
