Copyright 2010-2015 Obihai Technology, Inc.
66
-
SP4 Service
-
SP5 Service
-
SP6 Service
-
OBiTALK Service
-
OBiBluetooth
-
Trunk Group 1
-
Trunk Group 2
The reserved name
pli
found in the phone
DigitMap
and
OurboundCallRoute
parameters are substituted by the
corresponding name of the primary line: sp1, sp2, sp3, sp4, sp5, sp6, pp, bt, tg1, and tg2 for SP1, SP2, SP3, SP4, SP5,
SP6, OBiTALK, OBiBluetooth, Trunk Group 1, and Trunk Group 2, respectively.
Explicitly Selecting a Line to make call
If the user does not select a line to use, the phone picks the configured primary line as the preferred line to make the
call. The user may explicitly select a line to use in one of many ways:
-
Press the corresponding soft-key option hidden under the Lines soft key on the phone screen. There each Line
is represented with the number (userid, DID number, or extension) of the Line.
-
Press a Call Appearance Key that is bound to the Line (if one is defined and available. See Call Key section)
-
Press the Line Monitor Key for the Line (if one is defined)
If the explicitly selected line is different from the configured Primary Line, the phone temporarily reassign the selected
line as the primary line when performing digit map validation and call routing for the current call.
Dialing “Speed Dials 99” Numbers
Up to 99 speed dial numbers can be defined in the configuration and the feature is referred to as
Speed Dials 99
. They
are dialed as 1 – 99, the corresponding one/two-digit number (i.e. 1 – 99) can be defined in
User Settings
-
Speed Dials
.
These 99 speed dial numbers are unrelated to the speed dial feature keys. These numbers can be associated with
phones or devices reachable via an Internet or landline service or the OBiTALK network. Be careful with the Speed Dial
Set-Up as this may conflict with any Speed Dials that have been set-up on the OBiTALK portal. The Speed Dials that are
set-up on the OBiTALK portal will always overwrite anything set-up via the phone connected to the OBi. Note that it is
also possible for a user to setup a Speed Dials 99 number using star code (by default *74, *75 and *76 are defined for
this purpose).
Dialing Star Codes
Star codes are described in detail in the Star Codes section. Here we only describe how star code is dialed.
Star codes that are interpreted locally by the phone are defined in a star code profile. There are two star code profiles
in the configuration: Star Code Profile A and Star Code Profile B, each accepts up to 40 star code definitions. Only one
profile can be used and is defined in the parameter:
Phone Settings
::
StarCodeProfile
.
Called Party Caller ID Display
When making an outgoing call, the phone will attempt to match the called number against the phone book or buddy
list to find a corresponding entry. If one is found, it uses that entry to provide a name and picture of the called party to
show on the sreen.
Note: If the call is made over a SIP service, it is also possible for the service provider to offer a similar feature by sending
called party ID information in a 1xx response to the INVITE or in an UPDATE request sent to the phone before the call is
answered. The phone then updates the name and number display accordingly on the screen. This feature is also
referred to Calling Line ID.
