nVent.com
|
112
Raychem-AR-H58692-ACS30UIT2Programming-EN-1805
Assigning Circuit Voltage
The Setup|Voltage window allows you to set the circuit voltage used to calculate the energy
consumption of the circuit.
Fig. 3.94
Setup|Voltage Window (Roof & Gutter - Surface Temp Control)
Input the Circuit Voltage
Voltage: 120, 208, 240 or 277V (Standard ACS-PCM2-5 panels) Since the C910-485
measures voltage, this tab will not appear.
Default:
208 V
Assigning Power Cycle Test
The Setup|Maint. window allows you to enable the Power Cycle test start time and frequency. Once
the start time and test frequency are entered, the time of the next test will be displayed on this
screen.
Note:
If the circuit is disabled, forced on, or forced off, the power cycle test will be disabled until the
circuit is enabled.
Fig. 3.95
Setup|Maint. Window (Roof & Gutter - Surface Temp Control)
Input the start time and frequency for the Power Cycle test:
