nVent.com
|
16
Raychem-AR-H58692-ACS30UIT2Programming-EN-1805
Orange
Temperature not within setpoint plus deadband range (°F/°C)
Note:
This is not applicable for the HWAT control mode.
Alarm Relay Status
Green
No alarm
Red
In alarm condition
Note:
ACS-30 Program Integrator has been developed to pre-assign the circuits and control
variables, see
Appendix 5.6 ACS-30 Program Integrator on page 137.
Main Window and Events Navigation
Navigation Buttons
At the bottom of the Main window and Events window, the navigation buttons will appear once six
circuits are displayed. Use buttons to scroll up and down to view the status of the circuits on the
Main window, and on the Events/Alarms on the Events window.
When in the Main or Events windows, tap on anywhere on a row for a circuit to see the Status
window for that circuit.
Fig. 1.9
Main window and navigation buttons
TABLE 1.2 NAVIGATION BUTTONS
Top of list
When selected, displays the first five circuits of the Main and the
Events windows.
Page up
When selected, displays the previous five circuits of the Main and
the Events windows.
Move up one
circuit
When selected, displays the previous circuit on the Main and the
Events windows.
Move down one
circuit
When selected, displays the next circuit on the Main and the Events
windows.
Page down
When selected, displays the next five circuits of the Main and the
Events windows.
Bottom of list
When selected, displays the last five circuits of the Main and the
Events windows.
