nVent.com
|
126
Raychem-AR-H58692-ACS30UIT2Programming-EN-1805
4.1.2.
NAMING THE TEMPERATURE MONITORING CIRCUITS
Tap on the ID field and you can enter user defined identification with the text-messaging style
keypad.
Fig. 4.3 Temperature Monitor - Circuit Identification keypad
ASSIGNING RTDS
Once the Temperature Monitoring circuit has been selected and identified tap Setup|RTD tab to
assign RTDs from the system you wish to monitor.
In this mode you may assign up to four RTDs from any location in your system. Enter the Device
address and relay number.
Fig. 4.4 Temperature Monitor - Assigning RTDs
