nVent.com
|
33
Raychem-AR-H58692-ACS30UIT2Programming-EN-1805
G.F.
Displays the ground-fault current for the circuit.
Current
Displays the heating cable amperage of the circuit when the relay
output is on.
Energy
Displays the power currently consumed by the heating cable (Watts).
Voltage
Display the system voltage entered on the ACS-UIT2 or measured
by the C910-485 Controller.
The data in the Control Temp, G.F. and Current windows are displayed in color to identify their state:
Color Code
State
Black
Circuit is off
Green
Within normal range of setup parameters
Red
In alarm condition
Orange
Temperature is not within setpoint plus deadband range
Blinking Red/Orange
A latching alarm event has occurred
2.4. STATUS|RTDs WINDOW
The Status|RTDs window lists the RTD devices and numbers assigned to the selected circuit, along
with the last reported temperature from each RTD. Data in this status window cannot be changed.
Fig. 2.26
Status|RTDs window
For a circuit in the external device control mode the RTD status screen will indicate whether the dry
contact in the device are closed (powering the circuit) or open (turning the circuit off).
Fig. 2.27
Status|RTDs window - external device
