NTT docomo FOMA N703iD, Manual

Page: 88 / 500

86 Voice/Videophone Calls
Enlarging the image to be sent
During a videophone call, you can enlarge the image of yourself that is sent to the other party.
● If you are sending the image captured by the rear camera, you can enlarge the image by up to 5 (in 16 steps). The
image shot using the front camera can be enlarged by up to 2 (in 2 steps).
● If you switch between the front and rear cameras during a videophone call, the respective zoom settings are
retained. When a videophone call ends, the image reverts to normal scale.
● You cannot enlarge the image when you are sending a substitute image.
1 During a videophone call
v
Zoom in or out
<Hands-free switch>
Setting the Hands-free Operation for Videophone Calls
You can set the FOMA terminal to switch to hands-free mode automatically when starting a videophone call.
1
Videophone setting screen (P.84) “Hands-free switch” “ON”
■
When you do not switch calls
“OFF”
<Display setting>
Setting the Image Displayed during a Videophone Call
Default setting Main display: Other side Front camera Reverse: ON
You can set the image displayed on the main display or how to display your own camera image.
1
Videophone settings screen (P.84) “Display setting” Select any item:
Main display …… Selects the main display for the videophone call from “Other side/My side”.
“Other side” displays the camera image of the other party and “My side” displays your own camera image on the main
display.
Front camera Reverse …… Sets whether to display your camera image as a mirror image (ON) or normal image
(OFF) on the FOMA terminal during a call.
N
z
Even when “Hands-free switch” is set to “ON”, you can cancel the hands-free mode by pressing
o
( ) during the call.
z
The FOMA terminal does not switch to hands-free mode automatically in the following cases even when “Hands-free switch” is set to
“ON”:
・
While Manner mode is set.
・ When a flat-plug earphone/microphone with switch (optional) is connected (however, the microphone operation follows the “Select
microphone” setting).
・
When holding a call or Record message is activated for the incoming call.
１ｍ３２ｓ
Default setting
ON