NTT docomo FOMA N703iD, Manual

Page: 132 / 500

130 Tone/Display/Lighting Settings
<Icons setting>
Selecting the Icons to Display on the Standby Screen
You can set
b
to use for selecting the icons, date or time indication on the standby screen.
1
i
“SETTINGS” “Display” “Icons setting” “ON”
■ To make icons not selectable
“OFF”
Selecting the display icon with the multi function key (
b
)
1
On the standby screen
d
Highlight the icon with
b
You can also highlight the date or time indication.
The title of the highlighted icon is displayed.
2
d
(Select)
The setting screen for the selected icon, etc. is displayed.
Notifies you that you have a voice mail message in the Voice
Mail Service Center. Launches “Voice Mail”.
Notifies you that the alarm, schedule or To Do list could not be
notified. Displays the last alarm information that could not be notified.
Notifies you that the i-
α
ppli could not be launched
automatically.
Displays the “Auto start info” screen.
Notifies you that the i-
α
ppli standby screen shut down due to
an error.
Displays the security error history.
Notifies you that the software updating has been completed. Displays the update results screen after you enter your
security code.
Notifies you that the cumulative charge exceeds the limit you
specified. Displays the alarm information of “Notice designate calls”
after you enter your security code.
Notifies you that the automatic updating of the pattern data for
the scanning function has been completed. Or, notifies you
that the new pattern data for the scanning function has been
released. Displays the automatic updating result of the pattern data for
the scanning function. When the updating has not been
done successfully or when the new pattern data has been
released, the screen prompting you to update the pattern
data for the scanning function appears.
Notifies you that the Data Security Service could not be
updated. Displays the screen that allows you to connect to the Data
Security Center after you enter your security code.
N
z
The desktop icon that provides information disappears when it is called from each function or when it is performed.
z
To erase the display of the desktop icon that provides information, hold down
t
for 1 second or longer (you cannot erase “ /
/ ” icons).
z
When “Missed calls display” in the “Ring time (sec.)” is set to “Not display”, icon is not displayed for the incoming call whose ring
tone is played for shorter time than the time set in the “Set mute seconds”. However, the incoming calls from the phone numbers
stored in the phonebook are notified.
z
If you receive new mails or chat mails when the designated Inbox is protected for the security, selecting the desktop icon does not pop
up the emotion-expressing mail icon.
Icon Information provided Subsequent display/activation details
Default setting
ON
Ｓｅｌｆ ｍｏｄｅ