NTT docomo FOMA N703iD, Manual, Page: 138 / 500

136 Security Settings
Security Codes Used on the FOMA Terminal
To make the FOMA terminal more convenient and secure, some functions require the security code. In
addition to the security code for various FOMA terminal operations, you also have the Network security code
for accessing network services and the i-mode password. Make use of the FOMA terminal using an
appropriate security code according to the purpose.
■ Security Code
The security code is set to “0000” (4 zeros) at the time of purchase. You can change the security code by
yourself.
→ P.137
When the security code screen appears, enter the 4 to 8 digit security code and
press
d
(Set).
●
The entered security code is displayed as “_” and the numbers are not displayed.
●
When you enter a wrong security code or enter nothing for about 15 seconds, a warning tone
sounds and a warning message appears.
■
Network Security Code
The network security code is a 4-digit number required for using the DoCoMo e-site or various network
services. You can set any number at the time of subscription but you can change it afterwards by yourself.
If you have the “DoCoMo ID/Password” for general PC support site “My DoCoMo”, you can change the
network security code from your PC.
You can also change it by yourself using i-mode, from “
各種手続き ” (Applications and Procedures) on the
DoCoMo e-site.
* For details of “My DoCoMo” and “DoCoMo e-site”, see the back cover of this manual.
■
i-mode Password
The 4-digit “i-mode password” is required when registering/unregistering My Menu, subscribing to/
unsubscribing from the message service or the pay services of i-mode (There may be other passwords set
independently by the information service providers).
The i-mode password is set to “0000” (4 zeros) at the time of subscription. You can change the i-mode
password by yourself.
You can change the password using i-mode, by selecting
Menu English iMenu Options Change i-mode
Password.
■ PIN1 Code and PIN2 Code
You can set two security codes of PIN1 code and PIN2 code for the FOMA card (UIM).
These security codes are set to “0000” (4 zeros) at the time of subscription. You can change the PIN1/PIN2
codes by yourself.
→
P.137
PIN1 code is a 4 to 8 digit number (code) you enter each time you insert the FOMA card (UIM) to the FOMA
terminal or you turn on the FOMA terminal. This code identifies you as the user and is designed to prevent
improper use of your FOMA card (UIM) by others. When the PIN1 code entry set is set to “ON”, entering the
PIN1 code enables you to make and receive calls and use the functions of the FOMA terminal.
The PIN2 code is a 4 to 8 digit number that is used for resetting the total call charges, using or requesting
the user certificates, etc.
* When you purchase a new FOMA terminal and insert your current FOMA card (UIM), use the PIN1 and
PIN2 codes you set to the current card.
Notes on the security codes
●
Avoid using a readily predictable number such as “birthday”, “part of the phone number”, “street address number
or room number”, “1111” and “1234”. Make sure to make a note of the security code you set in case you forget it.
● Take great care not to disclose your security code to others. If your security code is disclosed to others and
abused, NTT DoCoMo shall have no liability for any damage due to any unauthorized use of it.
●
DoCoMo by no means inquire your security code.
●
If you forget any of your security codes, you must bring your official identification providing that you are the
subscriber (such as a driver’s license), the FOMA terminal, and the FOMA card (UIM) with you to an NTT
DoCoMo service counter. For details, contact the inquiries number provided on the back of this manual.
Ｓｅｃｕｒｉｔｙ ｃｏｄｅ？
Ｒｅｓｅｔ ｓｅｔｔｉｎｇｓ