NTT docomo FOMA N703iD, Manual

Page: 115 / 500

113 Tone/Display/Lighting Settings
<Keypad sound>
Setting the Keypad Tone
●
Setting this function to “OFF” also disables the following tones:
・ Warning tones ・ Battery level tone
・
The tone emitted when you start adjusting the volume
・
Snooze release tone of the alarm
● The keypad sound is played at the level set in “Volume” during a call, and fixed at the same level while not talking on
the phone.
1
i30
“ON”
■ To disable keypad sound
“OFF”
<Charge sound>
Setting the Confirmation Tone for Charging
This function sets to emit a short double-beep (“bibip”) when charging starts and ends.
●
The confirmation tone does not sound regardless of the setting specified in this function when:
・
The standby screen is not displayed
・
You are dialing
・ You receive a call ・ During a voice call
・ Manner mode is set ・ Public mode (Driving mode) is set
・ Standby voice memo is recorded ・ Voice announce is recorded
・
Data is sent and received
・
The FOMA terminal is turned off
1
i
“SETTINGS” “Other settings” “Charge sound” “ON”
■
To disable charge sound
“OFF”
<Clock Alarm Tone set>
Setting the Clock Alarm Tone
You can change the clock alarm tone for the alarm, schedule and To Do list.
1
i
“SETTINGS” “Clock” “Clock Alarm Tone set” “Select the alarm
tone”
Select the alarm tone from “Melody/i-motion/Music/Voice announce”.
■
To disable alarm
“OFF”
N
z
Regardless of the “Mail”, “Chat mail”, “MessageR” and “MessageF” settings in “Vibrator”, the FOMA terminal does not vibrate if the
“Mail/Msg. ring time” settings are not “ON”.
z
When the vibration is set, take care that the vibration does not move the FOMA terminal towards fire (e.g. on a space heater) or cause
it to fall off a table, etc.
z
The vibrator vibrates at a set strength regardless of the ring volume setting.
z
Even when “Melody linkage” is selected, the FOMA terminal not always vibrates to the melody. When no vibration pattern is set for the
melody or when an i-motion is set as the ring tone, the FOMA terminal vibrates in pattern 2.
<Vibrator priority>
z
When the vibrator settings are duplicated, the priority is assigned as follows:
① Vibrator for Discern connect ② Vibrator for Discern group ③ Vibrator setting
Default setting
ON
Default setting
ON
Default setting
Alarm Tone