NTT docomo FOMA N703iD, Manual

Page: 333 / 500

331 Other Useful Functions
<Notify cost limit>
Checking and Notifying Upper
Limit of Cost
Default setting Cost limit: Not set
Notify cost limit: OFF
When accumulated charge displayed at “Call data”
exceeds the cost limit set in this function, you are
notified on the standby screen or with alarms.
● The alarm notification works only once when the
accumulated charge exceeds the amount that is set
in advance.
● Exceeding the limit does not prevent you from making
a call.
1
i
“SETTINGS” “Call time/
Charge” “Notice designate calls”
Enter your security code
2 Select any item:
Cost limit setting
……
Sets the cost limit between ¥10
and ¥100,000 by ¥10 units.
Notify setting
Notify cost limit
……
Specifies whether to
notify the cost limit.
Alarm tone …… Selects the alarm tone from
the Melody folder.
Select “OFF” to disable alarm tone.
Volume
……
Sets the alarm tone volume with
c
.
3
Set the respective items
o
(Finish)
●
Alarm notification actions
After ending a call, the function notifies you with the
following methods when accumulated charges
exceed the cost limit.
■
When Notify cost limit is set to “ON” and
alarm tone is set to other than “OFF”
When the accumulated charge exceeds the
preset cost limit, the alarm starts sounding in
three seconds after you finish talking, and it lasts
about five minutes, while displaying the screen
notifying that the accumulated charge has
exceeded the limit. To stop the alarm tone, press
any key. After the notification, pressing
t
or
y
displays “ ” (Call billing) desktop icon on
the standby screen.
■ When Notify cost limit is set to “ON” and
alarm tone is set to “OFF”
When the accumulated charge exceeds the
preset cost limit, “
” (Call billing) desktop icon is
displayed on the standby screen.
●
Checking details of “ ” (Call billing)
The details of Notify cost limit is displayed by
selecting “
” (Call billing) desktop icon on the
standby screen.
1 On the standby screen
d
Select “ Call billing” (Notice
designate calls) Enter your
security code
The alarm information of “Call
billing” is displayed.
2 Check the details
d
(OK)
The standby screen reappears and “ ” (Call billing)
disappears.
N
z
The alarm volume while in original manner mode is the same
as that specified in “Phone vol.” in “Original”.
z
The charges for i-mode or packet communication, and the
charges for sending Chaku-moji are not included in this
function. To check i-mode communication charges, see the
“Mobile Phone User’s Guide
【
i-mode
】
” you have received at
the time of contract.
N
z
You can set the alarm mode by selecting “Operation
preferred” or “Alarm preferred” in “Alarm setting”.
３／２９ １１：３７
￥３０００
Ｃｏｓｔ ｌｉｍｉｔ
Ｄａｔｅ
Ｓｅｔ−ｕｐ ｃｏｓｔ ｌｉｍｉｔ
ｉｓ ｅｘｃｅｅｄｅｄ
Ｎｏｔｉｃｅ ｄｅｓｉｇｎａｔｅ ｃａｌｌｓ