Nortel BayStack 820, Installation And Reference Manual

Page: 205 / 258

Using the Command Line Interface
206901-A
10-55
Table 10-18 lists the SNMP commands.
clear trap manager <1-5>
Clears the IP address for the specified trap manager. When an SNMP trap
condition is met, and if trap generation has been enabled, a trap message is
automatically sent out to each trap manager whose IP address has been defined.
You can define up to five trap managers.
{enable|disable} trap
Enables or disables trap message generation. When you disable trap message
generation, no SNMP trap messages are generated. When you enable it, any
SNMP traps will be sent to each defined trap manager.
set community string read <“string”>
Sets the community string (up to 30 characters) used for authenticating SNMP
“get” and “getnext” requests. The community string is case-sensitive. The default
for the read community string is public.
set trap manager <1-5> <IPaddr>
Sets the IP address of the n th trap manager (n=1-5).
Example
BayStack> set trap manager 1 203.23.12.71
Table 10-18. SNMP Commands
Command Page
clear trap manager <1-5> 10-55
{enable|disable} trap 10-55
set community string read <“string”> 10-55
set trap manager <1-5> <IPaddr> 10-55
show snmp statistics 10-56
show trap manager <1-5> 10-56