manualshive.com logo in svg

Nortel BayStack 820, Installation And Reference Manual

The Nortel BayStack 820 offers a robust networking solution. Ensure hassle-free installation with our comprehensive Installation Instructions Manual. Download it free from our website manualshive.com and get started with this high-performance product instantly. Your go-to resource for all the necessary guidance to maximize the potential of your Nortel BayStack 820.

Share
Download
background image

System Messages

206901-A

B-3

   

Conflict with DHCP static IP address.

A duplicate static DHCP IP address has been detected. Select 
another address or modify the original entry. 

Conflict with dial-in address range.

An IP address has been entered which is in conflict with the pool of 
IP addresses reserved for dial-in users. Select another IP address 
or modify the dial-in user address range.

Conflict with private IP address.

The specified IP address is in conflict with the system private IP 
address pool. Modify the address range.

Connection successful.

A successful connection has been established.

Connection profile exceeds max 
number.

The maximum number of profiles has been configured. Up to 20 
remote office access or Internet access profiles or up to 48 dial-in 
user profiles, inclusive, are allowed by the system. To add another 
of this type, you must first delete an existing profile. 

Conversion integer/character failure.

An internal error occurred. Report this error to customer support.

Current password is wrong. The 
correct password is required.

The password entered is incorrect. Reenter the password.

Destination not currently reachable or 
call back configured.

Either the phone line is not operational, the destination is busy or 
doesn’t answer, or the remote profile is configured for call back and 
has disconnected the call.

Detecting IPX network number...

The router is attempting to automatically detect the IPX network 
number. This occurs when a zero or a blank is entered as the IPX 
network number.

DHCP static assignment table is full, no 
more actions allowed.

The maximum number of static DHCP entries has been 
configured. You must delete a static entry before a new one can be 
added.

Directory number 1 (or 2 or 3) 
unspecified.

Enter the specified Directory Number.

Disconnecting... Please wait. This 
action may take some minutes.

This message is displayed when the link is in the process of 
disconnecting. This operation may take up to several minutes 
depending upon the ISDN switch responses.

Download firmware, please wait (2 
minutes)...

System is downloading new firmware. This operation takes about 
two minutes to complete.

Duplicate public port.

The specified public port is already used in a static NAT table entry

Duplicate static assignment.

The specified name, MAC address or IP address already exists in 
the static DHCP assignment table.

Duplicate directory numbers or SPIDs.

At least two Directory Numbers or SPIDs are identical. These 
entries must be unique.

Table B-1.

System Messages

 (continued)

Message

Meaning

Summary of Contents for BayStack 820



































































































































































































































































Reviews:

No comments

Related manuals for BayStack 820

D-Link DSL-2730B Technical Support preview
DSL-2730B
Brand: D-Link Pages: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Brand: D-Link Pages: 2
M2M Pro User Manual (Extract preview
Pro
Brand: M2M Pages: 9
Dahua DHI-NVR5224-24P-4KS2 Quick Start Manual preview
DHI-NVR5224-24P-4KS2
Brand: Dahua Pages: 24
REXROTH efc series Instruction Manual preview
efc series
Brand: REXROTH Pages: 68
ZyXEL Communications ZyAIR G-3000H User Manual preview
ZyAIR G-3000H
Brand: ZyXEL Communications Pages: 299
WABCO CAN Router Manual preview
CAN Router
Brand: WABCO Pages: 29
NETGEAR RP614 - Web Safe Router Installation Manual preview
RP614 - Web Safe Router
Brand: NETGEAR Pages: 16
AMX AXB-PSCV Dimensional Drawing preview
AXB-PSCV
Brand: AMX Pages: 1
Maipu SM3100-28TC-AC Install Manual preview
SM3100-28TC-AC
Brand: Maipu Pages: 19
Patton electronics ipRocketLink 3086FR Quick Start Manual preview
ipRocketLink 3086FR
Brand: Patton electronics Pages: 12
Cabletron Systems CyberSWITCH CSX101 User'S Information Manual preview
CyberSWITCH CSX101
Brand: Cabletron Systems Pages: 72
B+B SmartWorx SPECTRE v3 LTE User Manual preview
SPECTRE v3 LTE
Brand: B+B SmartWorx Pages: 50
Cradlepoint MBR900 Quick Start Manual preview
MBR900
Brand: Cradlepoint Pages: 2
Lantronix WP2002000-01 User Manual preview
WP2002000-01
Brand: Lantronix Pages: 75
V-Count Ultima Go Quick Installation Manual preview
Ultima Go
Brand: V-Count Pages: 2
Altimium CVHH2 User Manual preview
CVHH2
Brand: Altimium Pages: 12
Enterasys Security Router X-PeditionTM User Manual preview
Security Router X-PeditionTM
Brand: Enterasys Pages: 466

Brands by name

Popular brands

Load more brands