Nortel BayStack 820, Installation And Reference Manual

Page: 161 / 258

Using the Command Line Interface
206901-A
10-11
Table 10-4 lists the DHCP commands.
+
add dhcp entry <entry _name>
Adds or edits a static DHCP assignment entry. When you add an entry to the Static
DHCP Assignment table, a DHCP client is assigned the same IP address
whenever a DHCP client request is received from the device with the specified
MAC address. The format of the MAC address uses embedded dashes.
Example
BayStack> add dhcp entry abigail
enter IP address (Unspecified): 192.168.168.134
enter MAC address (Unspecified): 00-40-05-35-db-4f
add dns {primary | secondary} <IPaddr>
Allows the specific assignment of Domain Name Server (DNS) IP addresses that
are subsequently assigned to requesting DHCP clients. These addresses also can
be automatically obtained using protocol negotiation when connecting to a remote
IP network, for example, a connection to an ISP. You can assign both a primary
DNS server address and a secondary DNS server address using separate
commands.
Table 10-4. DHCP Commands
Command Page
+add dhcp entry <entry _name> 10-11
add dns {primary | secondary} <IPaddr> 10-11
delete dhcp entry <entry_name> 10-12
delete dns {primary | secondary} 10-12
disable dhcp 10-12
enable dhcp 10-12
+set dhcp 10-13
show dhcp 10-13
show dhcp table 10-13